Chapter 5 Web Configurator
GS1900 Series User’s Guide
52
Spanning Tree This link takes you to screens where you can configure the RSTP/
MRSTP/MSTP to prevent network loops.
Global Configure global settings.
STP Port Configure STP port settings.
CIST Configure CIST settings.
CIST Port Configure CIST port settings.
MST Configure MST settings.
MST Port Configure MST port settings.
LLDP Configure global, port, local information, MED network policy, and
MED port settings.
Global Configure global settings.
Port Configure port settings.
Local Information Configure local information settings.
MED Network Policy Configure MED network policy settings.
MED Port Configure MED port settings.
QoS Configure general and trust mode settings.
General Port Configure port settings.
Queue This link takes you to a screen where you can configure queuing with
associated queue weights for each port.
CoS Mapping Configure CoS mapping settings.
DSCP Mapping Configure DSCP mapping settings.
IP Precedence
Mapping
Configure IP precedence mapping settings.
Trust Mode Global Configure global settings.
Port Configure port settings.
Security Configure port security, protected port, 802.1X and DoS settings.
Port Security Global Configure global settings.
Port Configure port settings.
Protected Port Configure protected port settings.
802.1X Global Configure global settings.
Port Configure port settings.
DoS Global Configure global settings.
Port Configure port settings.
AAA This link takes you to a screen where you can view authentication,
authorization and accounting services through external servers. The
external servers can be either RADIUS (Remote Authentication Dial-In
User Service) or TACACS+ (Terminal Access Controller Access-Control
System Plus).
Auth Method Configure auth method settings.
RADIUS Configure RADIUS settings.
TACACS+ Configure TACACS+ settings.
Management Configure syslog, SNMP, error disable, HTTP/HTTPS, users and remote
access control.
Table 10 Configuration Menu Screens Summary (continued)
FO LDER O R LINK TA B FUNC TION