ZyXEL Communications GS1900 Series - Page 53

Chapter 5 Web Configurator
GS1900 Series User’s Guide
53
Ma inte na nc e Me nu
Use the maintenance menu screens to manage configuration and firmware files, run diagnostics, and
reboot or shut down the Switch.
Syslog Global Configure global settings.
Local Configure local settings.
Remote Configure remote settings.
SNMP Global Configure global settings.
Community Configure community settings.
Group Configure group settings.
User Configure users settings.
Trap Configure trap settings.
Trap Destination Configure trap destination settings.
Error Disable This link takes you to a screen where you can configure CPU
protection and error disable recovery.
HTTP/HTTPS HTTP Configure HTTP settings.
HTTPS Configure HTTPS settings.
Users Configure users settings.
Remote Access
Control
This link takes you to a screen where you can configure global and
profile settings.
Table 11 Maintenance Menu Screens Summary
FO LDER O R LINK TA B FUNCTIO N
Firmware Upload Manage upload settings.
Management Manage dual image and images information.
Configuration Backup Manage backup configuration.
Restore Manage restore configuration.
Management Manage configuration settings.
Factory Default Restore factory defaults.
Diagnostics This link takes you to screens where you can view system logs and can
test ports.
Port Test Manage cable diagnosis and test results.
PING IPv4 Manage ping test settings.
IPv6 Manage IPv6 ping test settings.
Trace Manage trace route settings.
Reboot Reset the system.
Table 10 Configuration Menu Screens Summary (continued)
FO LDER O R LINK TA B FUNCTIO N