Chapter 6 Getting Start
GS1900 Series User’s Guide
57
Fig ure 58 Getting Start > Start up > 3 Step 3 Finish
Each field is described in the following table.
VLAN
In VLAN, you can create VLAN, tag VLAN setting, and view finished results.
In order to create VLAN, please do the following. Click G e tting Sta rt > VLAN > 1 Ste p 1 C re a te VLAN to
access this screen.
Table 15 Getting Start > Start up > 3 Step 3 Finish
LABEL DESCRIPTION
Host Name This field displays a host name.
IP Address The Switch needs an IP address for it to be managed over the network. The factory default
IP address is 192.168.1.1.
Subnet Mask The subnet mask specifies the network number portion of an IP address.
The factory default subnet mask is 255.255.255.0.
Gateway Type the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
DNS DNS (Domain Name System) is for mapping a domain name to its corresponding IP address
and vice versa. Enter a domain name server IP address in order to be able to use a domain
name instead of an IP address.
NTP (Network Time
Protocol)
This field displays the NTP time servers from which the Switch gets the time and date.
Username The default username is ad min and associated default password is 1234.
Password The default username is a dm in and associated default password is 1234.
Previous Click Pre vious to show the previous screen.
Finish Review the information and click Finish to create the task.
To Next Page
Loading...
