Chapter 11 Spanning Tree Protocol
GS2200-48 User’s Guide
110
and single spanning tree devices. A network may contain multiple MST regions
and other network segments running RSTP.
Figure 47 MSTP and Legacy RSTP Network Example
11.2 Spanning Tree Protocol Status Screen
The Spanning Tree Protocol status screen changes depending on what standard
you choose to implement on your network. Click Advanced Application >
Spanning Tree Protocol to see the screen as shown.
Figure 48 Advanced Application > Spanning Tree Protocol
This screen differs depending on which STP mode (RSTP or MSTP) you configure
on the Switch. This screen is described in detail in the section that follows the
configuration section for each STP mode. Click Configuration to activate one of
the STP standards on the Switch.
To Next Page
Loading...
