ZyXEL Communications GS2200-48 - Configuring SNMP

Chapter 32 Access Control
GS2200-48 User’s Guide
285
32.3.4 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access
Control to go back to the Access Control screen.
Figure 153 Management > Access Control > SNMP
rmon RmonRisingAlarm 1.3.6.1.4.1.890.1.5.1.1.16
.0.1
This trap is sent when a variable
goes over the RMON "rising"
threshold.
RmonFallingAlarm 1.3.6.1.4.1.890.1.5.1.1.16
.0.2
This trap is sent when the
variable falls below the RMON
"falling" threshold.
Table 107 SNMP Switch Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION