Chapter 18 Classifier
GS2200-48 User’s Guide
150
Click Advanced Application > Classifier in the navigation panel to display the
configuration screen as shown.
Figure 68 Advanced Application > Classifier
The following table describes the labels in this screen.
Table 43 Advanced Application > Classifier
LABEL DESCRIPTION
Active Select this option to enable this rule.
Name Enter a descriptive name for this rule for identifying purposes.
Packet
Format
Specify the format of the packet. Choices are All, 802.3 tagged, 802.3
untagged, Ethernet II tagged and Ethernet II untagged.
A value of 802.3 indicates that the packets are formatted according to the
IEEE 802.3 standards.
A value of Ethernet II indicates that the packets are formatted according to
RFC 894, Ethernet II encapsulation.
To Next Page
Loading...
