ZyXEL Communications GS2200-48 - Page 203

Chapter 23 Authentication & Accounting
GS2200-48 User’s Guide
203
23.3.2.2 Attributes Used for Accounting Exec Events
The attributes are listed in the following table along with the time that they are
sent (the difference between Console and Telnet/SSH Exec events is that the
Telnet/SSH events utilize the Calling-Station-Id attribute):
23.3.2.3 Attributes Used for Accounting IEEE 802.1x Events
The attributes are listed in the following table along with the time of the session
they are sent:
Table 67 RADIUS Attributes - Exec Events via Console
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name
DD D
NAS-Identifier
DD D
NAS-IP-Address
DD D
Service-Type
DD D
Acct-Status-Type
DD D
Acct-Delay-Time
DD D
Acct-Session-Id
DD D
Acct-Authentic
DD D
Acct-Session-Time
DD
Acct-Terminate-Cause
D
Table 68 RADIUS Attributes - Exec Events via Telnet/SSH
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name
DD D
NAS-Identifier
DD D
NAS-IP-Address
DD D
Service-Type
DD D
Calling-Station-Id
DD D
Acct-Status-Type
DD D
Acct-Delay-Time
DD D
Acct-Session-Id
DD D
Acct-Authentic
DD D
Acct-Session-Time
DD
Acct-Terminate-Cause
D
Table 69 RADIUS Attributes - Exec Events via Console
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name
DD D
NAS-IP-Address
DD D