Need help?Do you have a question about the ZyXEL Communications LTE3316-M604 and is the answer not in the manual?
General| DSL WAN | - |
|---|---|
| Ethernet WAN | Yes |
| WAN connection type | RJ-11/RJ-45 |
| 3G/4G USB modem compatibility | No |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 867 Mbit/s |
| Number of WLAN connections (max) | 32 |
| WLAN data transfer rate (first band) | 300 Mbit/s |
| VPN support | L2TPv2 & GRE |
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN interface type | Gigabit Ethernet |
| RJ-11 ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 4 |
| 4G standard | LTE |
| 2G standards | GSM |
| 3G standards | HSPA+, HSUPA, WCDMA |
| 4G bands supported | 700, 800, 850, 900, 1800, 2100, 2600 MHz |
| GSM bands supported | 850, 900, 1800, 2100 MHz |
| Security algorithms | WPA, WPA2 |
| Antennas quantity | 2 |
| Antenna gain level (max) | 5 dBi |
| Product type | Tabletop router |
| Product color | White |
| LED indicators | LTE, Power, Status, WLAN |
| Certification | CE |
| Output voltage | 12 V |
| AC input voltage | 110 - 240 V |
| Power source type | DC |
| Power consumption (typical) | 13 W |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 0 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Number of products included | 1 pc(s) |
| Cables included | LAN (RJ-45) |
Weight and Dimensions| Depth | 157 mm |
|---|---|
| Width | 202 mm |
| Height | 35 mm |
| Weight | 400 g |
Provides step-by-step instructions on how to access the Zyxel Device's Web Configurator via a web browser.
Guides users through initiating the Quick Start setup process via the Wizard icon to configure time zone and network settings.
Details how to select the Internet connection mode for the Zyxel Device to establish internet access.
Guides on enabling the firewall to protect LAN computers from Internet attacks and allowing specific traffic.
Explains how to block or deny access to specific website addresses and network features using MAC addresses.
Details the process of uploading new firmware to the Zyxel Device for feature enhancements and performance improvements.
Describes how to back up the Zyxel Device's current configuration to a file for safekeeping and restoration.
Explains how to upload a previously saved configuration file to restore previous device settings.
Provides an example of how to connect the Zyxel Device to the Internet using a SIM card and checking the status.
Explains how to enable DHCP to assign IP addresses and DNS servers to network systems automatically.
Explains how Dynamic DNS allows access to the Zyxel Device using a domain name for dynamic WAN IP addresses.
Explains how to enable or disable the main wireless network and configure SSIDs/passwords for security.
Explains how to change Internet access settings and view configured WAN services like Ethernet and Cellular.
Guides on configuring WAN connections by adding or editing internet connection settings for the Zyxel Device.
Details how to configure WAN backup settings for Internet access when the primary wired connection fails.
Guides on configuring LTE WAN connection, enabling data roaming, and network monitoring for cellular connectivity.
Explains how to enter a PIN for the SIM card to prevent unauthorized use and secure cellular access.
Explains how to enable IP Passthrough to allow Internet traffic to a LAN computer without NAT processing.
Guides on enabling Wireless LAN, entering SSID, and selecting wireless security mode like WPA2-PSK.
Details the WPA2-PSK security mode for robust WPA encryption and using a Pre-Shared Key for network security.
Guides on configuring guest wireless networks and setting up multiple SSIDs with varying security types.
Describes how to give exclusive access to specific devices or exclude them based on MAC addresses for network security.
Guides on configuring WiFi Protected Setup (WPS) for quick and secure wireless network setup between devices.
Guides on setting Local Area Network IP address, subnet mask, and configuring DHCP settings for the Zyxel Device.
Explains how to assign fixed IP addresses to LAN clients based on their MAC addresses for consistent network access.
Details the Universal Plug and Play (UPnP) feature for peer-to-peer network connectivity and automatic service discovery.
Guides on viewing and configuring static route rules on the Zyxel Device to manage traffic flow.
Explains how to forward incoming service requests from the Internet to servers on the local network.
Explains how trigger port forwarding allows LAN computers to dynamically use services by opening ports when needed.
Guides on specifying the IP address of a default server to receive packets not covered by Port Triggering.
Explains how Dynamic DNS updates IP address mapping to a hostname and configures DDNS service providers.
Guides on setting up file sharing through the Zyxel Device via USB service, accessing shared folders.
Details how to set up a new share or edit an existing one on the Zyxel Device for USB file sharing.
Outlines what can be done with the firewall, including general settings, protocol rules, access control, and DoS protection.
Guides on setting the firewall's security level to protect the device and network from hackers.
Explains how to configure customized services and port numbers for firewall rules and access control.
Describes how to define rules to accept, reject, or drop incoming/outgoing packets based on various criteria.
Explains how to activate protection against Denial of Service (DoS) attacks to maintain network availability.
Details how to configure restricted access schedules and URL filtering to block specific websites for users.
Explains how to set up a SIP account with a service provider for making outgoing VoIP calls and managing incoming calls.
Guides on creating or managing user accounts and their privileges on the Zyxel Device for access control.
Guides on configuring the Zyxel Device's time based on local time zone, time server, and Daylight Savings.
Details the process of uploading new firmware via the Zyxel website and rebooting the device.
Guides on backing up the current configuration and restoring previously saved files.
Guides on using ping, traceroute, or nslookup for troubleshooting connectivity and host reachability.
Addresses issues related to the Zyxel Device not turning on and checking power/hardware connections.
Provides troubleshooting steps for forgetting IP address or password, and accessing the login screen.
Offers solutions for not being able to access the Internet, including checking connections and SIM card status.
Provides troubleshooting steps for SIM card detection issues and invalid SIM card alerts.
To Next Page