Chapter 10 The Service Configuration Screens
User’s Guide
113
10.1.3 Before you Begin
• Ensure that you have all of your voice account information on hand. If not,
contact your voice account service provider to find out which settings in this
chapter you should configure in order to use your telephone with the WiMAX
Modem.
• Connect your WiMAX Modem to the Internet, as described in the Quick Start
Guide. If you have not already done so, then you will not be able to test your
VoIP settings.
10.2 SIP Settings
Click VOICE > Service Configuration > SIP Setting to setup and maintain
your SIP account(s) in the WiMAX Modem. Your VoIP or Internet service provider
should provide you with your account information. You can also enable and disable
each SIP account.
Figure 45 VOICE > Service Configuration > SIP Setting
To Next Page
Loading...
