User’s Guide
183
CHAPTER 16
The Remote Management
Screens
16.1 Overview
Use the TOOLS > Remote Management screens to control which computers can
use which services to access the WiMAX Modem on each interface.
Remote management allows you to determine which services/protocols can access
which WiMAX Modem interface (if any) from which computers.
You may manage your WiMAX Modem from a remote location via:
To disable remote management of a service, select Disable in the corresponding
Server Access field.
You may only have one remote management session running at a time. The
WiMAX Modem automatically disconnects a remote management session of lower
priority when another remote management session of higher priority starts. The
priorities for the different types of remote management sessions are as follows.
1 Telnet
2 HTTP
16.1.1 What You Can Do in This Chapter
•The WWW screen (Section 16.2 on page 185) lets you control HTTP access to
your WiMAX Modem.
•The Telnet screen (Section 16.3 on page 186) lets you control Telnet access to
your WiMAX Modem.
•The FTP screen (Section 16.4 on page 186) lets you control FTP access to your
WiMAX Modem.
Table 63 Remote Management
• Internet (WAN only) • ALL (LAN and WAN)
• LAN only • Neither (Disable).
To Next Page
Loading...
