ZyXEL Communications MAX-206M1R series - Class Configuration; Figure 87 Qos > Class Setup > Class Configuration; Table 74 Qos Class Setup

Chapter 17 QoS
User’s Guide
197
17.3.1 Class Configuration
Click the Create New Class button or the edit icon in the Class Setup screen to
configure a classifier.
Figure 87 QoS > Class Setup > Class Configuration
The following table describes the labels in this screen.
Table 74 QoS Class Setup
LABEL DESCRIPTION
Class Configuration
Active Select this to make a class active.
Index Enter an index number for the class. Similar classes are processed in
order of index number, from lowest to highest.
Name Enter a descriptive name of up to 20 printable English keyboard
characters, including spaces.
Interface Select an interface to which the class will apply:
• From WAN - The class is applied to all packets incoming from the
WAN (Wide Area Network).
• From LAN - The class is applied to all packets outgoing from the
LAN (Local Area Network).
DSCP Enter a DSCP value with which the WiMAX Modem replaces the DSCP
field in the packets.
Filter Configuration