EasyManua.ls Logo

ZyXEL Communications MAX-206M1R series - Figure 4 the Wimax Modems Leds; Table 2 the Wimax Modem; Leds; Wimax Modem Hardware

ZyXEL Communications MAX-206M1R series
366 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 Getting Started
User’s Guide
34
1.2 WiMAX Modem Hardware
Follow the instructions in the Quick Start Guide to make hardware connections.
1.2.1 LEDs
The following figure shows the LEDs (lights) on the WiMAX Modem.
Figure 4 The WiMAX Modem’s LEDs
The following table describes your WiMAX Modem’s LEDs (from right to left).
Table 2 The WiMAX Modem
LED STATE DESCRIPTION
Power Off The WiMAX Modem is not receiving power.
Red The WiMAX Modem is receiving power but has been
unable to start up correctly or is not receiving
enough power. See the Troubleshooting section for
more information.
Green The WiMAX Modem is receiving power and
functioning correctly.
STRENGTH INDICATORS
POWER
WIMAX LINK
VOICE

Table of Contents

Related product manuals