ZyXEL Communications MAX-206M1R series - Figure 28 ADVANCED > WAN Configuration >Wimax Configuration; Table 20 Radio Frequency Conversion; Table 21 ADVANCED > WAN Configuration >Wimax Configuration

Chapter 7 The WAN Configuration Screens
User’s Guide
83
Radio frequency is measured in Hertz (Hz).
Figure 28 ADVANCED > WAN Configuration >WiMAX Configuration
The following table describes the labels in this screen.
Table 20 Radio Frequency Conversion
1 kHz = 1000 Hz
1 MHz = 1000 kHz (1000000 Hz)
1 GHz = 1000 MHz (1000000 kHz)
Table 21 ADVANCED > WAN Configuration >WiMAX Configuration
LABEL DESCRIPTION
DL Frequency /
Bandwidth
These fields show the downlink frequency settings in kilohertz (kHz).
Enter values in these fields to have the WiMAX Modem scan these
frequencies for available channels in ascending numerical order.
Note: The Bandwidth field is not user-configurable; when the
WiMAX Modem finds a WiMAX connection, its frequency
is displayed in this field.
Contact your service provider for details of supported frequencies.
Apply Click to save your changes.
Reset Click to restore your previously saved settings.