ZyXEL Communications MGS3700-12C - Configuring SNMP

Chapter 39 Access Control
MGS3700-12C User’s Guide
374
39.3.4 Configuring SNMP
Click Management > Access Control > SNMP to view the screen as shown. Use
this screen to configure your SNMP settings.
Figure 192 Management > Access Control > SNMP
mactable MacTableFullEventOn 1.3.6.1.4.1.890.1.5.8.55.2
5.2.1
This trap is sent when more
than 99% of the MAC table is
used.
MacTableFullEventClear 1.3.6.1.4.1.890.1.5.8.55.2
5.2.2
This trap is sent when less than
95% of the MAC table is used.
rmon RmonRisingAlarm 1.3.6.1.2.1.16.0.1 This trap is sent when a variable
goes over the RMON "rising"
threshold.
RmonFallingAlarm 1.3.6.1.2.1.16.0.2 This trap is sent when the
variable falls below the RMON
"falling" threshold.
CFM dot1agCfmFaultAlarm 1.3.111.2.802.1.1.8.0.1 The trap is sent when the
Switch detects a connectivity
fault.
Table 130 SNMP Switch Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION