124
Figure 66 Red Hat 9.0: KDE: Ethernet Device: General
• If you have a dynamic IP address click Automatically obtain IP address settings with and
select dhcp from the drop down list.
• If you have a static IP address click Statically set IP Addresses and fill in the Address,
Subnet mask, and Default Gateway Address fields.
3 Click OK to save the changes and close the Ethernet Device General screen.
4 If you know your DNS server IP address(es), click the DNS tab in the Network
Configuration screen. Enter the DNS server information in the fields provided.
Figure 67 Red Hat 9.0: KDE: Network Configuration: DNS
5 Click the Devices tab.
To Next Page
Loading...
