27
router.
Site Survey
This page provides a tool to scan the wireless network for
nearby routers and APs.
WPS
This screen allows you to change the Wi-Fi Protected Setup settings
for the MWR102
Network Settings
LAN Interface
This screen allows you to configure the parameters for your Local Area
Network.
Management
Status Shows the current status and basic settings of the travel router
Statistics Shows packet counts for wired and wireless Ethernet connections.
Log Set remote log server parameters and view the system log.
Upgrade Firmware
Upgrade the travel router firmware.
Save/Reload
Settings
Save the current settings to a backup file, or reload the setting from a
previously saved file.
Set or change the travel router ADMINISTRATOR user name and
password.
Logout
5.4 LAN Screen
Use this section to configure your LAN settings while in Access Point mode.
Click Network Settings > LAN Interface to see the screen below.
To Next Page
Loading...
