81
17 Product Specifications
The following tables summarize the MWR102’s hardware and firmware features.
Hardware Features
Dimensions (W x D x H) 162 mm x 115 mm x 33 mm
Weight 252 g
Power Specification
Input: 100~240 V AC, 50~60 Hz
Output: 5V DC 2A
Ethernet ports
Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
LEDs PWR, LAN, WAN, WLAN, WPS
Reset Button
The reset button is built into the bottom panel. Use this button to restore
the MWR102 to its factory default settings. Press for 1 second to restart
the device. Press for 5 seconds to restore to factory default settings.
WPS button
Press the WPS on two WPS enabled devices within 120 seconds for a
security-enabled wireless connection.
Operation Environment
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 10% ~ 90%
Storage Environment
Temperature: -20º C ~ 70º C / -4ºF ~ 158ºF
Humidity: 20% ~ 70%
Table 25 Firmware Features
To Next Page
Loading...
