44
Key Length
Select 64-bit or 128-bit.
This dictates the length of the security key that the network is going to use.
Key Format
Select ASCII (5 Characters) or Hex (10 Characters) from the dropdown menu.
Encryption Key
Enter a Passphrase.
A passphrase functions like a password. In WEP security mode, it is further
converted by the MWR102 into a complicated string that is referred to as the “key”.
This key is requested from all devices wishing to connect to a wireless network.
Apply
Changes
Click Apply to save your changes back to the MWR102.
Reset
Click Reset to reload the previous configuration for this screen.
7.6.3 WPA-PSK/WPA2-PSK/WPA2-Mixed
Click Wireless > Security to display the Security screen. Select WPA-PSK, WPA2-PSK, or
WPA2-Mixed from the Security Mode list.
Figure 17 Wireless > Security: WPA-PSK/WPA2-PSK/WPA2-Mixed
To Next Page
Loading...
