Chapter 11 Control Panel: Maintenance
NAS Series User’s Guide
181
11.3.3 Add the Power Control Schedule
Click the Add Power Control Schedule icon in the Control Panel > Maintenance > Power > Power On/Off
Schedule screen to open this screen. Use this screen to configure power control schedules to have the
NAS turn on, turn off, or reboot at specified times.
Figure 150 Control Panel > Maintenance > Power > Power On/Off Schedule: Add
The following table describes the labels in this screen.
This table lists the power on, power off, and reboot schedules. For example, you could have one schedule to turn
the NAS on every morning, at 8:00, another schedule to turn it off every evening at 18:00, and a third schedule to
have it reboot every Friday at 14:00.
Click a column’s heading cell to sort the schedules by that column’s criteria. Click the heading cell again to
reverse the sort order.
Type This field displays whether the power control schedule has the NAS turn on, turn off, or reboot.
Frequency This field shows how often (monthly, weekly, or daily) the NAS is to apply this power control
schedule.
Execute Time This field shows when the NAS is to use this power control schedule (when the NAS is to turn on,
turn off, or reboot).
Table 105 Control Panel > Maintenance > Power > Power On/Off Schedule (continued)
LABEL DESCRIPTION
Table 106 Control Panel > Maintenance > Power > Power On/Off Schedule: Add
LABEL DESCRIPTION
Type Select whether this power control schedule has the NAS turn on, turn off, or reboot.
Frequency Select whether the NAS is to apply this power control schedule entry on a monthly, weekly, or
daily basis.
To Next Page
Loading...
