Chapter 12 Status Center
NAS Series User’s Guide
198
12.1.2 Network
The Network screen display the NAS connection status. From the Status Center screen, click Network to
open the screen as shown.
Figure 159 Status Center > Network
Firmware Version This is the NAS firmware version.
MAC Address This displays the NAS’s unique physical hardware address (MAC) for the LAN Ethernet port.
You need the MAC address to register the product at myZyxel.com. Customer support
may also request it for troubleshooting purposes.
CPU This displays a summary of CPU usage by all current processes.
Note: If too many users are using the NAS then the NAS may appear sluggish.
Memory This shows how much of the NAS's total memory is being used.
Process Name This displays the top 10 processes that occupy the most CPU usage.
CPU Usage This displays a summary of CPU usage by all current processes.
Memory Usage This shows how much of the NAS's total memory is being used.
UPS This shows the Uninterruptible Power Supply (UPS) capacity.
Fan Speed This is the RPM (Rotations Per Minute) of the NAS’s fans.
CPU Temperature This displays the temperature near the NAS’s CPU. The NAS generates an emergency log if
the temperature goes out of the normal operating range. If the temperature goes even
higher, the NAS shuts down automatically to avoid damage from overheating. If the NAS
overheats, make sure the fans are working and it is in a well ventilated place.
Table 114 Status Center > System Information (continued)
LABEL DESCRIPTION
To Next Page
Loading...
