ZyXEL Communications NAS326 - Iscsi Luns Screens

Chapter 5 Storage Manager
NAS Series User’s Guide
81
The configuration steps are as follows:
1 Create an iSCSI LUN Volume for the iSCSI target in NAS1.
2 Configure NAS1 as an iSCSI target.
Figure 65 iSCSI Connection Example
5.4.1 iSCSI LUNs Screens
This section enables you to create, up-map, and delete LUN volumes, as well as display the volumes’
information. Click Storage Manager > iSCSI > iSCSI LUNs to display the following screen.
Figure 66 Storage Manager > iSCSI > iSCSI LUNs
T
I
LAN
WAN
NAS1
VOL1