Chapter 16 Backup Planner
NAS Series User’s Guide
277
Figure 224 Backup Planner > Backup > Restore
Restore Job: Step 1 Source
If you set the NAS to restore a backup based on the pre-configured backup job in the previous screen,
the following screen displays. Select a backup job’s name from the list and the time point at which the
backup job was done. Click Next to continue.
Figure 225 Backup Planner > Backup > Restore Job: Step 1 Source (Backup Job)
If the Enter Password screen displays, enter the password that you configured to encrypt the backup
files and click Apply.
To Next Page
Loading...
