Chapter 16 Backup Planner
NAS Series User’s Guide
276
Step 5 Summary
Use this screen to review the settings you configured. Click Apply to complete the setup. Otherwise,
click Back to return to the previous screen, or click Cancel to close the screen without saving.
Figure 220 Backup Planner > Backup: Add Job Step 5 Summary
16.3.2 Edit Job Screens
Use this screen to edit an existing backup job. Some attributes of the backup job cannot be changed,
such as the name, backup type, source folder and so on.
Enable data
compression
Select this option if you want the NAS to compress the files for your backup. Otherwise, clear it.
In an Archive backup, compression is a method of packing computing files in a way that saves
hard disk space.
For a Synchronization backup (to a remote target), the source data will be compressed before
the transmission to reduce the transmission time. It is used in slow networks only.
Enable data
encryption
Select this option and enter a password if you want the NAS to encrypt the files for your backup.
Otherwise, clear it.
In an Archive backup, this means using a password to secure files.
For a Synchronization backup (to a remote target), this means securing the file transfer session.
However the final file stored on the remote NAS is unencrypted. This takes a long time. Make sure
you really need this feature before enabling it.
Back Click this to go back to the previous screen.
Next Click this to go to the next screen.
Cancel Click this to close the screen without saving.
Table 154 Backup Planner > Backup: Add Job Step 4 Schedule and Options
LABEL DESCRIPTION
To Next Page
Loading...
