ZyXEL Communications NAS520 - 16.4.2 Sync Settings

Chapter 16 Backup Planner
NAS Series User’s Guide
287
16.4.2 Sync Settings
Click Backup Planner > Copy/Sync Button > Sync Settings to open the following screen.
Figure 236 Backup Planner > Copy/Sync Button > Sync Settings
The following table describes the labels in this screen.
Backup Target Select a share in which to save the backup files.
Note: The NAS will not create a new folder to store the backup files. It is
recommended to create a specific share (such as “backup”) for backup
purposes.
Apply Click this to save your changes.
The configuration file is saved on the USB device.
Reset
Click this to restore your previously saved settings.
Table 157 Backup Planner > Copy/Sync Button > Copy Settings (continued)
LABEL DESCRIPTION
Table 158 Backup Planner > Copy/Sync Button > Sync Settings
LABEL DESCRIPTION
NAS Sync Target Select the NAS share to use with the synchronization function.
USB Volume If your USB device has multiple partitions, select which partition to use with the
synchronization function.
Sync Direction Select USB -> NAS to synchronize files from your USB or SD device to the NAS.
Select NAS -> USB to synchronize files from the NAS to your USB or SD device.
Select NAS <-> USB to synchronize files in both directions simultaneously.