Chapter 16 Backup Planner
NAS Series User’s Guide
283
Figure 230 Backup Planner > Backup > Restore Job: Step 2 Folders/Files to Restore
Restore Job: Step 3 Destination
Select the location in the NAS where you want to restore your backup.
If you set the NAS to restore a backup based on the pre-configured backup job, you can either select
Original to restore the files to their original location in the NAS, or select Other location and choose a
folder where you want to place the restored files.
If you set the NAS to restore a backup based on the selected backup file(s), you just choose a folder
where you want to place the restored files.
The screen then shows the path of the folder you selected.
Click Next to continue.
To Next Page
Loading...
