Chapter 5 Storage Manager
NAS Series User’s Guide
47
Delete Click Delete to remove the selected volume. A pop-up screen displays. Type "DELETE" in the
text box and click Delete to remove it.
Note: If you delete a volume, all data in the volume disks is erased.
Add Hot Spare Select a RAID 1 or RAID 5 volume and click Add Hot Spare to add another disk as a hot-spare
(standby) to the RAID array. A pop-up screen displays.
Select a disk from the drop-down list box and then click Apply.
See Table 10 on page 44 for more information about RAID.
Note: The capacity of the disk you are adding must be equal to or greater than
the largest disk in the RAID 1 or RAID 5 array.
Remove Hot Spare Select a RAID 1 or RAID 5 volume and click Remove Hot Spare to remove the standby drive
from the RAID array.
Table 13 Storage Manager > Internal Storage > Volume (continued)
LABEL DESCRIPTION
To Next Page
Loading...
