Chapter 5 Storage Manager
NAS Series User’s Guide
68
The following table describes the labels in this screen.
Step 3 Summary
Figure 54 Create Volume on a New Disk Group: Summary
The following table describes the labels in this screen.
Table 27 Create Volume on Disk Group: Create Volume
LABEL DESCRIPTION
Step 2. Create Volume
Disk group information
Name This field displays the name of the disk group.
Unallocated capacity This field displays the percentage of the available size, the size in used, and total size
of the disk group.
Create Volume
Volume Name This field displays the default name of the volume. You can also type a new name for
the volume.
Allocated volume size This field displays the number of Gigabytes available on the volume by default. You
can set the size to allocate for this volume. Click MAX to allocate all available
capacity of the disk group to the volume.
Back Click Back to go to the previous step.
Next Click Next to go to the next step.
Cancel Click Cancel to close the screen without saving any settings.
Table 28 Create Volume on Disk Group: Summary
LABEL DESCRIPTION
Disk Selected This field displays the hard disk(s) on which the RAID array will be built.
RAID Type This field displays the type of RAID on which the volume will be built.
To Next Page
Loading...
