Chapter 13 WAN
NBG6515 User’s Guide
108
This screen displays when you select PPTP encapsulation.
Figure 81 Network > WAN > Internet Connection: PPTP Encapsulation
The following table describes the labels in this screen.
Table 53 Network > WAN > Internet Connection: PPTP Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access
Encapsulation To configure a PPTP client, you must configure the User Name and Password fields for a
PPP connection and the PPTP parameters for a PPTP connection.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the User Name above.
Retype to
Confirm
Type your password again to make sure that you have entered is correctly.
Nailed-up
Connection
Select Nailed-Up Connection if you do not want the connection to time out.
To Next Page
Loading...
