ZyXEL Communications NBG6515 - Page 141

Chapter 21 Bandwidth Management
NBG6515 User’s Guide
141
The following table describes the labels in this screen
Table 71 Bandwidth Management Rule Configuration: User-defined Service
See Appendix E on page 232 for commonly used services and port numbers.
LABEL DESCRIPTION
BW Budget Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum or
minimum bandwidth allowed for the rule in kilobits per second.
Destination
Address Range
Enter the IP address range of the destination computer.
The NBG applies bandwidth management to the service or application that is entering this
computer.
Destination
Port Range
This is the port number of the destination that define the traffic type, for example TCP port
80 defines web traffic.
Source Address
Range
Enter the IP address range of the computer that initializes traffic for the application or
service.
The NBG applies bandwidth management to traffic initiating from this computer.
Source Port
Range
This is the port number of the source that define the traffic type, for example TCP port 80
defines web traffic.
Protocol Select the protocol (TCP, UDP) for which the bandwidth management rule applies.
Apply Click Apply to save your customized settings.
Cancel Click Cancel to exit this screen without saving.