ZyXEL Communications NBG6604 - Login Screen; Change Default Password Screen

Chapter 2 Introducing the Web Configurator
NBG6604 User’s Guide
15
2.2.1 Login Screen
Note: If this is the first time you are accessing the Web Configurator, you may be redirected to
the eaZy123 wizard. Refer to Chapter 3 on page 17 for the eaZy123 setup screens.
The Web Configurator initially displays the following login screen.
Figure 4 Login Screen
The following table describes the labels in this screen.
2.2.2 Change Default Password Screen
You should see a screen asking you to change your password (highly recommended) as shown next.
Table 4 Login Screen
LABEL DESCRIPTION
Please enter the device’s
administrator password
Type "1234" (default) as the password. Click Login.