Chapter 14 Maintenance
NBG6604 User’s Guide
95
Figure 61 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the Firmware
Upgrade screen.
14.7 Backup/Restore Screen
Backup configuration allows you to back up (save) the NBG6604’s current configuration to a file on your
computer. Once your NBG6604 is configured and functioning properly, it is highly recommended that
you back up your configuration file before making configuration changes. The backup configuration file
will be useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your NBG6604.
Click Maintenance > Backup/Restore. Information related to factory defaults, backup configuration,
and restoring configuration appears as shown next.
Figure 62 Maintenance > Backup/Restore
To Next Page
Loading...
