Chapter 12 LAN
NBG6616 User’s Guide
109
12.5 IP Alias Screen
Use this screen to have the NBG6616 apply IP alias to create LAN subnets. Click LAN > IP Alias.
Figure 70 Network > LAN > IP Alias
The following table describes the labels in this screen.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your NBG6616
will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the
NBG6616.
Apply Click Apply to save your changes back to the NBG6616.
Cancel Click Cancel to begin configuring this screen afresh.
Table 43 Network > LAN > IP (continued)
LABEL DESCRIPTION
Table 44 Network > LAN > IP Alias
LABEL DESCRIPTION
IP Alias 1, 2 Check this to enable IP alias to configure another LAN network for the NBG6616.
IP Address Type the IP alias address of your NBG6616 in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your NBG6616
will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the
NBG6616.
Apply Click Apply to save your changes back to the NBG6616.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
