Chapter 14 NAT
NBG6616 User’s Guide
120
14.4 Port Trigger Screen
To change your NBG6616’s trigger port settings, click Network > NAT > Port Trigger. The screen
appears as shown.
Note: Only one LAN computer can use a trigger port (range) at a time.
Figure 79 Network > NAT > Port Trigger
The following table describes the labels in this screen.
Server IP
Address
Type the IP address of the server on your LAN that receives packets from the port(s)
specified in the Port field.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes back to the NBG6616.
Cancel Click Cancel to begin configuring this screen afresh.
Table 51 Network > NAT > Port Forwarding Edit (continued)
LABEL DESCRIPTION
Table 52 Network > NAT > Port Trigger
LABEL DESCRIPTION
# This is the rule index number (read-only).
Name Type a unique name (up to 15 characters) for identification purposes. All characters are
permitted - including spaces.
To Next Page
Loading...
