Chapter 11 Wireless LAN
NBG6616 User’s Guide
103
Click Network > Wireless LAN 2.4G/5G > QoS. The following screen appears.
Figure 63 Network > Wireless LAN 2.4G/5G > QoS
The following table describes the labels in this screen.
11.8 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN 2.4G/5G > WPS.
Note: With WPS, wireless clients can only connect to the wireless network using the first
SSID on the NBG6616.
Table 39 Network > Wireless LAN 2.4G/5G > QoS
LABEL DESCRIPTION
WMM QoS Select Enable to have the NBG6616 automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes
them run more smoothly.
This field is not configurable and the NBG6616 automatically enables WMM QoS if you
select 802.11n, 802.11an, 802.11gn or 802.11bgn in the Wireless LAN 24G/5G
> General screen.
Apply Click Apply to save your changes to the NBG6616.
Cancel Click Cancel to reload the previous configuration for this screen.
To Next Page
Loading...
