Need help?Do you have a question about the ZyXEL Communications WAH7003 and is the answer not in the manual?
General| Wireless Standard | 802.11b/g/n |
|---|---|
| Frequency Bands | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| Ethernet Ports | 1 x 10/100 Mbps |
| WAN Port | 1 x 10/100 Mbps |
| Battery | 2000 mAh |
| Security | WPA2 |
| Type | Portable Router |
| LTE Category | Cat 4 |
| SIM Card Slot | Micro-SIM |
| Ports | 1 x Micro USB |
| Antennas | Internal |
Guides on how to reset the WAH7003 to its original factory default settings.
Details the 'admin' and 'guest' login accounts and their respective privilege levels.
Guides on configuring the WAH7003's LAN IP address and subnet mask.
Explains selecting connection profiles for mobile network access and Internet connectivity.
Describes setting the default Wi-Fi key (password) and SSID for the wireless network.
Details changing the WAH7003's Internet access settings like flight mode and roaming.
Explains viewing, adding, or removing connection profiles for mobile networks.
Guides on changing the WAH7003's 2G/3G network connection type.
Guides on viewing or configuring the WAH7003's management IP address.
Details enabling the WAH7003's built-in DHCP server for IP address assignment.
Guides on assigning IP addresses to specific computers via their MAC addresses.
Guides on enabling wireless LAN, setting SSID, and selecting the security mode.
Explains how to configure WPS for quick and secure wireless network setup.
Details configuring rules to allow or deny devices access based on their MAC addresses.
Provides a detailed overview of how WPS works for secure wireless network setup.
Guides on viewing and configuring IP filtering rules for the firewall.
Details configuring rules to restrict network traffic by MAC addresses.
Explains how to block users from accessing specific websites.
Details backing up, restoring, and resetting device configurations to factory defaults.
Guides on uploading new firmware to upgrade the device's performance.
To Next Page
