Chapter 9 System
WAH7003 User’s Guide
64
The following table describes the labels in this screen.
9.3 Configuration Screen
The Configuration screen allows you to backup and restore device configurations. You can also
reset your device settings back to the factory default.
Figure 40 System > Configuration
9.3.1 Backup
Backup Configuration allows you to back up (save) the WAH7003’s current configuration to a file on
your computer. The configuration file should be saved and edited in UTF-8 (without BOM) format, if
you’re using Windows Notepad, make sure you choose File > Save as UTF-8 in the text editor.
Once your WAH7003 is configured and functioning properly, it is highly recommended that you back
up your configuration file before making configuration changes. The backup configuration file will be
useful in case you need to return to your previous settings.
Click Backup to save the WAH7003’s current configuration to your computer.
9.3.2 Restore
This screen allows you to upload a new or previously saved configuration file from your computer to
your WAH7003.
Type in the location of the file you want to upload in the Configuration File field or click Browse
... or Choose File to find it. Remember that you must decompress compressed (.ZIP) files before
you can upload them. Click Restore to begin the upload process. The WAH7003 automatically
restarts.
Table 35 System > About
LABEL DESCRIPTION
Device Name This displays the WAH7003 system name. It is used for identification.
FW Version This displays the current firmware version of the WAH7003.
IMEI This displays the International Mobile Equipment Number (IMEI) which is the serial number
of the built-in 3G module. IMEI is a unique 15-digit number used to identify a mobile device.
To Next Page
Loading...
