Chapter 4 WAN
WAH7003 User’s Guide
26
4.3 User Profile Screen
Use this screen to view, add or remove a connection profile. A connection profile defines the
parameters that you need to connect to a mobile network, such as the APN, user name and
password. Click WAN > Connection > User Profile. The screen appears as shown next.
Figure 11 WAN > Connection > User Profile
The following table describes the labels in this screen.
The summary table shows you the configured profiles on the WAH7003.
Profile This field displays the profile index number.
Type This field displays whether the profile is user-configured (User) via the WAN > Connection
> User Profile screen or a system default profile (System).
Name This field displays the name of the profile.
APN This field displays the Access Point Name (APN) in the profile.
Protocol This field displays Internet Protocol (IP) version used by the profile.
User This field displays the user name in the profile.
Password This field displays the password in the profile.
Total Num This field displays the total number of profiles configured on the WAH7003.
Table 11 WAN > Connection > Connection Operation (continued)
LABEL DESCRIPTION
Table 12 WAN > Connection > User Profile
LABEL DESCRIPTION
Profile This field displays the profile index number.
Click an entry to be able to modify the entry’s settings.
Name This field displays the name of the profile. Enter a descriptive name to identify the profile.
You can enter up to 30 printable ASCII characters. Spaces are allowed.
APN This field displays the Access Point Name (APN) in the profile.
Enter the Access Point Name (APN) provided by your service provider. Connections with
different APNs may provide different services (such as Internet access or MMS (Multi-Media
Messaging Service)) and charging method.
You can enter up to 30 printable ASCII characters. Spaces are allowed.
Protocol This field displays Internet Protocol (IP) version used by the profile.
Select IPv4 to connect to an IPv4 network, IPv6 to connect to an IPv6 network, or IPv4v6
to connect to either one.