ZyXEL Communications WAH7003 - Date and Time Settings

Chapter 9 System
WAH7003 User’s Guide
67
Figure 43 System > Password
The following table describes the labels in this screen.
9.7 Date and Time Screens
For effective scheduling and logging, the WAH7003 system time must be accurate. The WAH7003
has a software mechanism to set the time manually or get the current time and date from an
external server.
9.7.1 Date Screen
To change your WAH7003’s time and date, click System > Date and Time > Date. The screen
displays as shown. You can manually set the WAH7003’s time and date or have the WAH7003 get
the date and time from a time server.
Figure 44 System > Date and Time > Date
Table 37 System > Password
LABEL DESCRIPTION
Select the user to
change password
Select the account you want to configure.
Old password Type the default password or the existing password you use to access the system in this
field.
New Password Type your new system password of between 4 and 8 characters. Note that as you type a
password, the screen displays as dot (.) for each character you type.
Retype new
password
Type the new password again in this field.
Apply Click Apply to save your changes back to the WAH7003.