WAH7003 User’s Guide
63
CHAPTER 9
System
9.1 Overview
Use the system screens to configure general WAH7003 settings.
9.1.1 What You Can Do in this Chapter
•Use the About screen to view basic information about the WAH7003 (Section 9.2 on page 63).
•Use the Configuration screen to backup and restore device configurations. You can also reset
your device settings back to the factory default (Section 9.3 on page 64).
•Use the Firmware Upgrade screen to upload new firmware to your WAH7003 (Section 9.4 on
page 65).
•Use the Power Saving screen to enable and configure the power saving settings in the
WAH7003. (Section 9.5 on page 66).
•Use the Password screen to change the WAH7003’s system password (Section 9.6 on page 66).
•Use the Date and Time screens to change the WAH7003’s time and date and configure daylight
saving time (Section 9.7 on page 67).
•Use the Language screen to change the WAH7003’s web configurator language (Section 9.8 on
page 69).
•Use the System Log screens to view logged messages and specify to where the WAH7003 is to
send logs (Section 9.9 on page 70).
•Use the Reboot screen to restart theWAH7003 (Section 9.10 on page 71).
9.2 About Screen
Use this screen to view basic information about the WAH7003. To access this screen, click System
> About.
Figure 39 System > About
To Next Page
Loading...
