ZyXEL Communications WAH7003 - Content Filter Screen Settings

Chapter 8 Firewall
WAH7003 User’s Guide
61
8.4 Content Filter Screen
Use this screen to block the users on your network from accessing certain web sites. To access this
screen, click Security > Firewall > Content Filter.
Figure 38 Security > Firewall > Content Filter
The following table describes the labels in this screen.
Active This field displays whether the rule is active or not.
Click to enable or disable the rule.
Source MAC This field displays the source MAC address of the packets you wish to filter.
Mon ~ Sun This field displays Y for the days that you want the WAH7003 to perform MAC filtering.
Otherwise, it shows N.
Start Time
End Time
This field displays the starting and ending time that the packets with the specified source
MAC address are allowed or not allowed to go through the WAH7003.
Click an entry’s delete icon to remove the rule.
Click the add icon to create a new rule.
Click the OK icon to save the rule settings.
Click the delete icon to remove all rules.
Total Num This field displays the total number of MAC filtering rules configured on the WAH7003.
Apply Click this button to save your changes to the WAH7003.
Table 33 Security > Firewall > MAC Filter (continued)
LABEL DESCRIPTION
Table 34 Security > Firewall > Content Filter
LABEL DESCRIPTION
Enable URL
Filter
Select Off to disable content filtering.
Select On to enable content filtering.
Blacklist/
Whitelist
If you select Blacklist, the WAH7003 prohibits the users from accessing the web sites listed
below.
If you select Whitelist, the WAH7003 blocks all web sites except ones listed below.
# This field displays the rule index number.
Click an entry to be able to modify the rule’s settings.