Chapter 3 Home
WAH7003 User’s Guide
22
3.3.1 LAN Settings
Enter the WAH7003’s LAN IP address and subnet mask. Click Next to configure the WAN settings.
Note: If you change the LAN IP address, use the new IP address to access the web
configurator and manage the WAH7003.
Figure 6 Wizard > LAN Settings
3.3.2 WAN Settings
Select a pre-defined profile and click Set to use the profile settings to connect to a mobile network.
Click Next to configure the Wi-Fi settings.
Note: You should have a pre-configured connection profile in the WAN > Connection >
User Profile screen. Check with your service provider for the APN, user name and
password.
To Next Page
Loading...
