Chapter 7 Wi-Fi
WAH7003 User’s Guide
46
The following table describes the labels in this screen.
7.5 Station List Screen
Use this screen to view information about the associated stations (or “wireless clients”). Click Wi-Fi
> Station List to access this screen.
Figure 29 Wi-Fi > Station List
Table 28 Wi-Fi > MAC Filter
LABEL DESCRIPTION
Enable MAC
Address Filter
Select Off to disable MAC filtering.
Select On to enable MAC filtering.
Mode Define the filter action for the list of MAC addresses.
Select Deny listed stations to block access to the WAH7003. MAC addresses not listed will
be allowed to access the WAH7003.
Select Allow listed stations to permit access to the WAH7003. MAC addresses not listed
will be denied access to the WAH7003.
per page Select how many entries you want to display on each page.
page Select a page number to go to or use the arrows to navigate the pages of entries.
# This field displays the index number of the MAC address entry.
Click an entry to be able to modify the entry’s settings.
Active This field displays whether the entry is active or not.
Click to enable or disable the entry.
Name This field displays the name of the MAC address entry.
Click to enter a descriptive name to identify the MAC address entry. You can enter up to 20
printable ASCII characters. Spaces are allowed.
MAC Address This field displays the MAC addresses of the wireless devices that are allowed or denied
access to the WAH7003.
Click to enter or change the MAC address of the wireless devices that are allowed or denied
access to the WAH7003 in this field. Enter the MAC addresses in a valid MAC address
format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Click an entry’s delete icon to remove the MAC address entry.
Click the add icon to create a new entry.
Click the OK icon to save the entry settings.
Click the delete icon to remove all entries.
Total Num This field displays the total number of entries configured on the WAH7003.
Apply Click this button to save your changes to the WAH7003.