ZyXEL Communications WAH7003 - Leased Hosts Screen

Chapter 5 Network
WAH7003 User’s Guide
35
The following table describes the labels in this screen.
5.6 Leased Hosts Screen
This screen displays current DHCP client information (including IP Address, Host Name and MAC
Address) of network clients using the WAH7003 DHCP servers. To access this screen, click
Network > DHCP > Leased Hosts.
Figure 22 Network > DHCP > Leased Hosts
The following table describes the labels in this screen.
Table 22 Network > DHCP > Static DHCP
LABEL DESCRIPTION
per page Select how many entries you want to display on each page.
page Select a page number to go to or use the arrows to navigate the pages of entries.
# This field displays the index number of the static DHCP entry.
Click an entry to be able to modify the entry’s settings.
Status This field displays whether the entry is active or not.
Click to select Enabled or Disabled.
MAC Address This field displays the MAC address of the device to which the WAH7003 assigns the entry’s
IP address.
Click to enter or change the MAC address.
IP Address This field displays the IP address that the WAH7003 assigns to a device with the entry’s MAC
address.
Click to enter or change the IP address.
Click an entry’s delete icon to remove the profile.
Click the add icon to create a new entry.
Click the OK icon to save the entry settings.
Click the delete icon to remove all entries.
Total Num This field displays the total number of entries configured on the WAH7003.
Apply Click this button to save your changes to the WAH7003.
Table 23 Network > DHCP > Leased Hosts
LABEL DESCRIPTION
per page Select how many entries you want to display on each page.
page Select a page number to go to or use the arrows to navigate the pages of entries.