Chapter 25 Maintenance
NBG6616 User’s Guide
180
Figure 126 Access Point Mode
25.11 Sys OP Mode Screen
Use this screen to select how you want to use your NBG6616.
Figure 127 Maintenance > Sys OP Mode
The following table describes the labels in the General screen.
Table 80 Maintenance > Sys OP Mode
LABEL DESCRIPTION
Configuration Mode
Router Mode Select Router Mode if your device routes traffic between a local network and
another network such as the Internet. This mode offers services such as a firewall
or bandwidth management.
You can configure the IP address settings on your WAN port. Contact your ISP or
system administrator for more information on appropriate settings.
To Next Page
Loading...
