Chapter 21 Bandwidth Management
NBG6616 User’s Guide
150
Figure 98 Bandwidth Management Rule Configuration: User-defined Service
The following table describes the labels in this screen.
See Appendix C on page 224 for commonly used services and port numbers.
Table 66 Bandwidth Management Rule Configuration: User-defined Service
LABEL DESCRIPTION
BW Budget Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum
or minimum bandwidth allowed for the rule in kilobits per second.
Destination Address
Start
Enter the starting IP address of the destination computer.
The NBG6616 applies bandwidth management to the service or application that is
entering this computer.
Destination Address End Enter the ending IP address of the destination computer.
The NBG6616 applies bandwidth management to the service or application that is
entering this computer.
Destination Port This is the port number of the destination that define the traffic type, for example
TCP port 80 defines web traffic.
Source Address Start Enter the starting IP address of the computer that initializes traffic for the
application or service.
The NBG6616 applies bandwidth management to traffic initiating from this
computer.
Source Address End Enter the ending IP address of the computer that initializes traffic for the
application or service.
The NBG6616 applies bandwidth management to traffic initiating from this
computer.
Source Port This is the port number of the source that define the traffic type, for example TCP
port 80 defines web traffic.
Protocol Select the protocol (TCP, UDP, BOTH) for which the bandwidth management rule
applies.
If you select BOTH, enter the protocol for which the bandwidth management rule
applies. For example, ICMP for ping traffic.
Apply Click Apply to save your customized settings.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
