Chapter 9 System
NWA1120 Series User’s Guide
102
Click System > Certificates. The following screen shows.
Figure 50 System > Certificates
The following table describes the labels in this screen.
9.6 Telnet Screen
Use this screen to configure your NWA for remote Telnet access. You can use Telnet to access the
NWA’s Command Line Interface (CLI).
Click System > Telnet. The following screen displays.
Figure 51 System > Telnet
Table 29 System > Certificates
LABEL DESCRIPTION
Import Certificate
Import
Certificate
Enter the location of a previously-saved certificate to upload to the NWA. Alternatively,
click the Browse button to locate a list.
Browse Click this button to locate a previously-saved certificate to upload to the NWA.
Import Click this button to upload the previously-saved certificate displayed in the Import
Certificate field to the NWA.
Delete Certificate
You can delete a
certificate
Select the certificate from the list that you want to delete.
Delete Click this to delete the selected certificate.
To Next Page
Loading...
