Chapter 4 Tutorial
NWA1120 Series User’s Guide
31
To configure these settings, you need to know the Media Access Control (MAC) addresses of the
devices you want to allow users of the guest network to access. The following table shows the
addresses used in this example.
4.2.1 Configure the SSID Profiles
1 Log in to the NWA (see Section 2.2 on page 19). Click Wireless LAN > SSID. The SSID screen
appears.
2 Click the Edit icon next to the Profile1.
3 Rename the Profile Name and SSID as SSID01. Click Apply.
4 Repeat Step 2 and 3 to change Profile2 and Profile3 to VoIP_SSID and Guest_SSID.
Table 5 Tutorial: Example Information
Network router (A) MAC address 00:AA:00:AA:00:AA
Network printer (B) MAC address AA:00:AA:00:AA:00
To Next Page
Loading...
