ZyXEL P-330W
2.2 Front Panel LEDs
The PWR/SYS LED blinks amber while performing system testing and then turns solid green if the testing is
successful. The LAN and WAN LEDs turn on if they are properly connected.
LED STATUS COLOR DESCRIPTION
Off The P-330W is not receiving power.
On Power to the P-330W is in the process of booting. Amber
Blinking Unit is resetting to factory defaults.
PWR/SYS
Green On The P-330W is receiving power.
Off No device is connected to the LAN port.
On An Ethernet device is connected to the LAN port.
LAN 1- 4
Green
Blinking The P-330W is sending/receiving data on the LAN port.
Off The WAN connection is not ready, or has failed.
On The P-330W has a successful WAN connection.
WAN
Green
Blinking The P-330W is sending/receiving data.
Off The WLAN connection is turned off.
On The WLAN is active.
WLAN
Green
Blinking The WLAN is sending/receiving data.
4
To Next Page
Loading...
