P-660HN Series Support Notes
112
All contents copyright © 2010 ZyXEL Communications Corporation.
2. Firmware/Configurations Uploading and Downloading using TFTP
Using TFTP client software
Upload/download firmware/confituration via LAN
Upload/download Prestige configurations via LAN
(1) Using TFTP to upload/download firmware/configuration via LAN
Step 1: TELNET to your Prestige first before running the TFTP software
Step 2: Type the CI command 'sys stdio 0' to disable console idle timeout
in Command Line Interface (CLI)
Step 3: Run the TFTP client software
Step 4: Enter the IP address of the Prestige
Step 5:To upload the firmware, please save the remote file as 'ras' to
Prestige. After the transfer is complete, the Prestige will program the upgraded
firmware into FLASH ROM and reboot itself.
An example:
To Next Page
Loading...
