P-660HN Series Support Notes
69
All contents copyright © 2010 ZyXEL Communications Corporation.
Downloading ZyXEL's private MIB
Configure the P-660HN-T1A for SNMP
The SNMP related settings in P-660HN-T1A are configured in Web
Configurator, Advanced Setup, Advanced -> Remote MGNT -> SNMP The
following steps describe a simple setup procedure for configuring all SNMP
settings.
Note: You may need to edit a firewall rule to permit SNMP Packets.
9. Using syslog
To Next Page
Loading...
